Bowed/Non-flat Build Plate

From RigidWiki
Revision as of 21:33, 11 August 2014 by Ramak (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

There have been reports of the aluminum build plate having a bowed surface, which leaves a high spot in the middle after leveling the bed. Thomas Long published a procedure for adding an adjuster in the middle of the bed, so that the bow can be pulled flat:

http://www.caveman3.com/3DPrinting/Rigidbot_Plate_Warp_fix.pdf