Shopping List

From RigidWiki
Jump to: navigation, search

This page is a rough list to answer the question of what you need to prepare to build the RigidBot Kit.

  • Tools
    • 1.5mm Hex (Included)
    • 2.0mm Hex (Included)
    • 2.5mm Hex (Included)
    • 4.0mm Hex
    • Flush Cutters (scissors will work, so will pliers with wire cutters)
    • Rubber mallet
    • Caliper
  • Basic printing
    • Blue Painter's tape for PLA
    • Rubbing alcohol

There are many other optional parts you may need (see, but these should be enough to get the kit together and laying down plastic.